Model DLM-16
Hydraulic Post Driver

Ref. No Part No. Description No. Req'd
1 814401 Driving Ram Weldment 1
2 814551 Guide Block 4
3 2504132 Machinery Bushing, 1"ID x 18 Ga. VAR.
4 2504110 Machinery Bushing, 1"ID x 14 Ga. VAR.
5 2504049 Drive Zerk, 5/16" 2
6 814411 Carriage Weldment 1
814478 Complete Cylinder Assembly (Items #7 - #15) 1
7 814417 Tube, Hydraulic Cylinder 1
8 814421 Rod, Hydraulic Cylinder 1
9 814422 Rod Guide, Hydraulic Cylinder 1
10 814495 End Cap w/ Rod Seal 1
11 814424 Rod Seal (only) 1
12 2500054 Nut, 1/2"-13NC Stamplock Hex 1
13 814425 Nut, 3/4"-10NC Full Hex (Drilled & Tapped) 1
14 2503196 Set Screw, 1/4"-20NC x 1/4" 1
15 2500037 Nut, 3/4"-10NC Nylock Hex 1
16 814426 Bumper, Urethane 4
17 2502008 Washer, 3/8" Springlock 4
18 2500004 Nut, 3/8"-16NC Full Hex 4
19 814427 Transport Lock Weldment 1
20 814430 Lower Spring Bracket 1
21 2503198 Bolt, 3/8"-16NC x 2-1/2" Gr.8 Full Thread 2
22 2500055 Nut, 3/8"-16NC Stamplock Hex 5
23 814431 Spring, Driving Ram 2
24 814432 Clip, Spring 4
25 814581 Pipe, Plastic Stabilizing 2
26 814433 Rubber Guard 1
27 814629 Guard Retainer 1
28 2503266 Bolt, 5/16"-18NC x 1-1/4" Carriage Head 6
29 2500011 Nut, 5/16"-18NC Full Hex 6
30 2502011 Washer, 5/16" Springlock 6
31 2501012 Washer, 5/16" Flat 4
32 814488 Pin, Transport Lock 1
33 590188 Hair Clip Pin, 5/32" (AK-2705) 1
34 814408 Upper Spring Bracket 1
35 2503201 Bolt, 3/8"-16NC x 2-1/4" Gr.5 Hex Head 1
36 2501004 Washer, 3/8" Flat 1
37 814543 Cylinder Stabilizer Strap 1
38 814476 Post Holder w/Handle 1
39 2504129 Handle, Post Holder 1
40 2502007 Washer, 5/8" Springlock 6
41 2500013 Nut, 5/8"-11NC Full Hex 6
42 101056 Safety Sign - Safety Instructions 1
43 101057 Safety Sign - Warning (Set Brake) 1
44 101058 Safety Sign - Warning (Avoid Injury) 1
45 101078 Safety Sign - Caution (Safety Glasses) 1
46 101027 Safety Sign - Warning (Stand Clear) 1
47 101079 Safety Sign - Notice (1/2 Turn Loose) 1
48 101080 Safety Sign - Notice (1/2 Turn Loose) 1
49 101122 Safety Sign - Warning (Hi Pressure) 1
NOTICE:     Worksaver Inc. has a corporate policy of continous product improvement and development: Therefore, specifications are subject to change without any advance notice. Worksaver Inc. is not responsible for differences between specifications or illustrations contained in this site and the actual equipment.
To report problems or ask questions concerning Worksaver's web site, please contact the Webmaster.
Copyright © 1996-1999 Worksaver, Inc. All Rights Reserved. Legal Notices
This document was last modified on