Model DLM-20
Hydraulic Post Driver

Ref. No Part No. Description No. Req'd
1 814502 Driving Ram Weldment 1
2 814549 Guide Block 4
3 2504132 Machinery Bushing, 1"ID x 18 Ga. VAR.
4 2504110 Machinery Bushing, 1"ID x 14 Ga. VAR.
5 2504049 Drive Zerk, 5/16" 2
6 814510 Carriage Weldment 1
814516 Complete Cylinder Assembly (Items #7 - #15) 1
7 814517 Tube, Hydraulic Cylinder 1
8 814520 Rod, Hydraulic Cylinder 1
9 814422 Rod Guide, Hydraulic Cylinder 1
10 814538 End Cap w/ Rod Seal 1
11 814523 Rod Seal (only) 1
12 2500054 Nut, 1/2"-13NC Stamplock Hex 5
13 814524 Nut, 1"-14NF Full Hex (Drilled & Tapped) 1
14 2503196 Set Screw, 1/4"-20NC x 1/4" 1
15 2500057 Nut, 1"-14NF Nylock Hex 1
16 814426 Bumper, Urethane 4
17 2502008 Washer, 3/8" Springlock 4
18 2500004 Nut, 3/8"-16NC Full Hex 4
19 814525 Transport Lock Weldment 1
20 814527 Lower Spring Bracket 1
21 2503202 Bolt, 1/2"-13NC x 2-1/2" Gr.8 Full Thread 2
22 814530 Spring, Driving Ram 2
23 814531 Clip, Spring 4
24 814532 Damper, Spring 1
25 814547 Pipe, Plastic Stabilizing 2
26 814533 Rubber Guard 1
27 814626 Guard Retainer 1
28 2503266 Bolt, 5/16"-18NC x 1-1/4" Carriage Head 6
29 2500011 Nut, 5/16"-18NC Full Hex 6
30 2502011 Washer, 5/16" Springlock 6
31 2501012 Washer, 5/16" Flat 4
32 814536 Pin, Transport Lock 1
33 590188 Hair Clip Pin, 5/32" (AK-2705) 1
34 814408 Upper Spring Bracket 1
35 2503072 Bolt, 3/8"-16NC x 3" Gr.5 Hex Head 1
36 2501004 Washer, 3/8" Flat 1
37 2500055 Nut, 3/8"-16NC Hex Stamplock 1
38 814543 Cylinder Stabilizer Strap 1
39 814476 Post Holder w/Handle 1
40 2504129 Handle, Post Holder 1
41 2502007 Washer, 5/8" Springlock 6
42 2500013 Nut, 5/8"-11NC Full Hex 6
43 101056 Safety Sign - Safety Instructions 1
44 101057 Safety Sign - Warning (Set Brake) 1
45 101058 Safety Sign - Warning (Avoid Injury) 1
46 101078 Safety Sign - Caution (Safety Glasses) 1
47 101027 Safety Sign - Warning (Stand Clear) 1
48 101079 Safety Sign - Notice (1/2 Turn Loose) 1
49 101080 Safety Sign - Notice (1/2 Turn Loose) 1
50 101122 Safety Sign - Warning (Hi Pressure) 1
NOTICE:     Worksaver Inc. has a corporate policy of continous product improvement and development: Therefore, specifications are subject to change without any advance notice. Worksaver Inc. is not responsible for differences between specifications or illustrations contained in this site and the actual equipment.
To report problems or ask questions concerning Worksaver's web site, please contact the Webmaster.
Copyright © 1996-2011 Worksaver, Inc. All Rights Reserved. Legal Notices
This document was last modified on