SG-26H
Hydraulic Stump Grinder


Other Associated Part List's
Hydraulic PartsWiring Parts

Ref. No Part No. Description No. Req'd
1 811641 Mount Weldment (SG-26H) 1
2 811651 Housing Weldment 1
3 811510 Wheel Guard Weldment 1
4 811517 Special Bolt, 3/4"-10NC x 3-1/2" 2
5 2505034 Bushing, Spring (1" ID x 1-1/4" OD x 5/8" 2
6 2500084 Nut, 3/4"-10NC Vibration Proof 6
7 2504049 Drive Zerk, 5/16" 2
8 811567 Gearbox Assembly w/Plugs 1
9 2504072 Breather Plug, 1/2" NPT 1
10 2504222 Pipe Plug, 1/4" NPT Square Head 1
11 2503258 Bolt, 3/4"-10NC x 2-1/4" Hex Head Gr. 5 4
12 811531 Grinder Wheel Weldment (SG-26) 1
13 811534 Carbide Tooth 33
14 2503061 Bolt, 3/8"-16NC x 1" Hex Head Gr.8 35
15 2502008 Washer, 3/8" Springlock 35
16 2501003 Washer, 1/2" Flat 11
17 2500040 Nut, 1/2"-13NC Whiz Flange Hex 15
18 811557 Stand Weldment 1
19 341826 Hitch Pin, 1/2" x 3-1/2" 1
20 2503012 Bolt, 1/2"-13NC x 3" Hex Head Gr.2 1
21 2502002 Wahser, 1/2" Springlock 1
22 2500003 Nut, 1/2"-13NC Hex 1
23 2504120 Hydraulic Cylinder, 2 x 24 1
24 863070 Cylinder Pin - 1" 2
25 2504121 Cotter Pin, 3/16" x 1-1/2" 2
26 2505517 Reducer Bushing, 3/8" to 1/4" 1
27 2505643 Hydraulic Motor, SG-26H (Char-Lynn) 1
28 2503118 Bolt, 1/2"-13NC x 2" Hex Head Gr.5 4
30 2505644 Valve Assembly, SG-26H 1
31 2506017 Shaft Coupling, SG-26H 1
32 2504014 Zerk, Grease 1/8"NPT 1
33 811657 Guard Weldment 4
34 2503304 Bolt, M8 x 16mm Hex Head 4
35 2502011 Washer, 5/16" Springlock 1
36 811541 Rubber Guard 1
37 811547 Guard Retainer Strap 5
38 2503007 Bolt, 1/2"-13NC x 2" Hex Head Gr.2 2
39 101027 Safety Sign-Warning (Stand Clear) 1
40 101188 Safety Sign-Gearbox Notice 1
41 101122 Safety Sign-Warning (Hi Pressure) 1
42 101186 Safety Sign-Warning (Shields) 1
43 101206 Safety Sign-Danger (Debris) 1
44 101219 Safety Sign-Warning (Valve) 1
45 101201 Safety Sign-Warning (Manual) 1
46 650286 Blank Washer (31 x 56 x 6) 1
47 650287 Castle Nut, M30 x 2.0 (8.8) 1
48 650482 Cotter Pin, B6 x 60 1
49 101292 Decal - Valve Control 1

NOTICE:     Worksaver Inc. has a corporate policy of continous product improvement and development: Therefore, specifications are subject to change without any advance notice. Worksaver Inc. is not responsible for differences between specifications or illustrations contained in this site and the actual equipment.
To report problems or ask questions concerning Worksaver's web site, please contact the Webmaster.
Copyright © 1996-1999 Worksaver, Inc. All Rights Reserved. Legal Notices
This document was last modified on