Adjustable Base Mounting Plate Assembly

For HPD-16 & HPD-20 Models

Ref. No	Part No.	Description	No. Req'd
1	814438	Manual Pivot Weldment	1
2	814450	Side Tilt Crank (3/4"-10NC Threads)	1
3	814453	Fore & Aft Crank (1"-8NC Threads)	1
4	2504015	Cotter Pin, 1/8" x 1-1/2"	2
5	2504110	Machinery Bushing, 1" ID x 14 Ga.	2
6	814457	Clevis Weldment	1
7	2504049	Drive Zerk, 5/16"	4
8	814460	Support Channel Weldment	1
9	830309	Lift Pin, 1" Dia. x 8" Lg.	2
10	2504068	Cotter Pin, 1/4" x 1-3/4"	4
11	2504149	Machinery Bushing, 3/4" ID x 10 Ga.	2
12	814463	Nut, 1"-8NC Full Hex (Drilled & Tapped)	1
13	814425	Nut, 3/4"-10NC Full Hex (Drilled & Tapped)	1
14	2503196	Set Screw, 1/4"-20NC x 1/4"	2
15	590027	Toplink Bushing, (AK-54)	1

NOTICE:     Worksaver Inc. has a corporate policy of continous product improvement and development: Therefore, specifications are subject to change without any advance notice. Worksaver Inc. is not responsible for differences between specifications or illustrations contained in this site and the actual equipment.

To report problems or ask questions concerning Worksaver's web site, please contact the Webmaster. Copyright © 1996-1999 Worksaver, Inc. All Rights Reserved. Legal Notices This document was last modified on