ES-1.5 PKP
1.5 Bushel Broadcast Seeder / Spreader
w/Truck Mount Receiver

Ref. No Part No. Description No. Req'd
1 480301 Hopper & Main Frame Assembly 1
2 480036 Tube, Receiver Hitch 1
3 2500003 Nut, 1/2"-13NC Full Hex 2
4 2502002 Washer, 1/2" Springlock 2
5 480037 Washer, Special 2
6 2501003 Washer, 1/2" Med Flat 2
7 2503109 Bolt, 1/2"-13NC x 3-1/2" Hex Head 2
8 3450008 Middle Plate 1
9 2505003 Bronze Flanged Bearing 1
10 420510 Lower Plate 1
11 2503008 Bolt, 1/4"-20NC x 1/2" Round Head 7
12 2500008 Nut, 1/4"-20NC Hex Flange Whiz 6
13 403421 Fan, Plastic 1
14 2503042 Set Screw, 5/16"-18 x 5/16" Allen 2
15 2401026 Motor 12V DC 1
16 2500034 Motor Nut, #10-32 Hex 2
17 2401014 Switch, (12V Rheostat) 1
18 2503027 Bolt, 1/4"-28NF x 1/2" Hex Head 1
19 480017 Scale Plate & Lever Assembly 1
20 480005 Control Rod & Pin Assembly 1
21 2504010 Cotter Pin 3/32" x 1/2" 1
22 2501006 Washer, 1/4" Flat 2
23 2500007 Nut, 1/4"-20NC Wing 1
24 2500006 Nut, 1/4"-20NC Nylock Hex 1
25 2401011 Battery Clamp (Alligator Type) 1
26 480320 Wire 10 Ft. No. 14 Copper 1
27 2401006 Connector No. 14 Wire Ring Type 1
28 2401010 Connector No. 14 Wire Butt Type 1
29 2503014 Bolt, 1/4"-20NC x 3/4" Round Head 1
NOTICE:     Worksaver Inc. has a corporate policy of continous product improvement and development: Therefore, specifications are subject to change without any advance notice. Worksaver Inc. is not responsible for differences between specifications or illustrations contained in this site and the actual equipment.
To report problems or ask questions concerning Worksaver's web site, please contact the Webmaster.
Copyright © 1996-1999 Worksaver, Inc. All Rights Reserved. Legal Notices
This document was last modified on