MANUAL POSITIONING DRIVER

  
Post Driver with Manual Adjusting Base and Stabilizer Legs

If you have a small amount of fence to build or replace, then the models HPD-16 and HPD-20 are the ones for you. If you have a large amount of fence to build, then these drivers are ideal for terrain requiring little alignment adjustment. The heavy duty adjusting base is built to withstand shock loads drivers produce during operation. Both drivers use two manual adjustable, deep-threaded, plated cranks. One crank adjusts the fore and aft positions. Another crank adjusts the side to side positions. Grease zerks are located on all pivoting members.

STANDARD STABILIZER LEGS

  • Eliminates Tractor tire bounce.
  • Reduces driver movement.
  • Adjustable for different working heights.
  • Driver is self-standing.
  • Allows inside storage.

New QuickChange system: Worksaver has introduced a new Feature called The QuickChange System for replacing the rod seal in the field.

HPD-16 effective with S/N 4077
HPD-20 effective with S/N 4531		HPD-series QuickChange System

Model:HPD-16HPD-20
Maximum post size:6 in x 9 ft8¾ in x 10 ft
Impact at full stroke:32,000 lbs.80,000 lbs.
Impact at half stroke:16,000 lbs.40,000 lbs.
Minimum tractor size:22 pto hp35 pto hp
Rear hitch type:Cat. I and II
Drive cylinder size:2 in x 56 in2 in x 68 in
Operating range:50" to 116"50" to 128"
Tilt adjustment (front/back):10° from vertical
Tilt adjustment (side/side):17° from vertical

Driver Part Lists
HPD-16 HPD-20
3Pt. Mount(Before Oct.2000)
3Pt. Mount (After Oct. 2000)		 Adjustment Base
Hydraulic Control Valve & Mounting Bracket

Optional Adjustable Leg package

NOTICE!

Units manufactured from Feb. 1997 & Oct. 2000, the 3pt. mount already has plates mounted for adjustable legs.

For units manufactured prior to Feb. 1997, a new 3pt. frame must be purchased. (Part# 814865, which includes the adjustable leg package.)

HPD-16/20 Manuals
Please read carefully and follow all safety instructions, use post holder, and always wear safety glasses.
NOTICE:     Worksaver Inc. has a corporate policy of continous product improvement and development: Therefore, specifications are subject to change without any advance notice. Worksaver Inc. is not responsible for differences between specifications or illustrations contained in this site and the actual equipment.
To report problems or ask questions concerning Worksaver's web site, please contact the Webmaster.
Copyright © 1996-1999 Worksaver, Inc. All Rights Reserved. Legal Notices
This document was last modified on