 |  | |  |
| MP-114 & MP-214 PLOWS |
| Go To 14" Moldboard - Click Here | Go To MP-214 Plow - Click Here |
MP-114 Plow Standard Size One Bottom 14 Inch Plow | |
| Ref. No | Part No. | Description | No. Req'd |
| 1 | 800506 | Main Frame Weldment | 1 |
| 2 | 800526 | Pull Shaft Weldment | 1 |
| 3 | 800534 | Brace, Right Hand Side | 1 |
| 4 | 590108 | Lift Pin (AK-578) | 1 |
| 5 | 2503004 | Bolt, 1/2"-13NC x 1-1/2" Hex Head Gr.2 | 2 |
| 6 | 2502002 | Washer, 1/2" Springlock | 1 |
| 7 | 2500003 | Nut, 1/2"-13NC Full Hex | 1 |
| 8 | 800535 | Shank, Plow Bottom | 1 |
| 9 | 2503135 | Bolt, 3/4"-10NC x 3" Hex Head Gr. 5 (Pivot) | 1 |
| 10 | 2502001 | Washer, 3/4" Springlock | 1 |
| 11 | 2500002 | Nut, 3/4"-10NC Full Hex | 1 |
| 12 | 2503039 | Bolt, 3/8"-16NC x 2-1/2" Hex Head Gr.2 (Shear) | 1 |
| 13 | 2501004 | Washer, 3/8" Flat | 2 |
| 14 | 2500055 | Nut, 3/8"-16NC Stamplock Hex | 1 |
| 15 | 2503088 | Bolt, 5/8"-11NC x 2-1/2" Hex Head Gr.5 | 2 |
| 16 | 2502007 | Washer, 5/8" Springlock | 2 |
| 17 | 2500013 | Nut, 5/8"-11NC Full Hex | 2 |
| Go To 14" Moldboard - Click Here | Go To MP-114 Plow - Click Here |
MP-214 Plow Standard Size Two Bottom 14 Inch Plow | |
| Ref. No | Part No. | Description | No. Req'd |
| 1 | 800511 | A-Frame LH | 1 |
| 2 | 800512 | A-Frame RH | 1 |
| 3 | 800513 | Cross Bar Weldment | 1 |
| 4 | 590108 | Lift Pin (AK-578) | 1 |
| 5 | 800514 | U-Bolt, 5/8"-11NC 2"ID x 4"Lg. | 2 |
| 6 | 2502007 | Washer, 5/8" Springlock | 1 |
| 7 | 2500013 | Nut, 5/8"-11NC Full Hex | 1 |
| 8 | 800516 | Angle, Cross Bar Attachment | 1 |
| 9 | 800517 | Spacer | 1 |
| 10 | 800518 | Brace Strap | 1 |
| 11 | 2503066 | Bolt, 5/8"-11NC x 4" Hex Head Gr.2 | 1 |
| 12 | 2503051 | Bolt, 5/8"-11NC x 2-1/2" Hex Head Gr.2 | 1 |
| 13 | 800521 | Main Bar (Long) 44-1/2" | 2 |
| 14 | 800522 | Main Bar (Short) 35" | 1 |
| 15 | 800523 | Tie Bar | 2 |
| 16 | 800524 | Shank Plate | 2 |
| 17 | 800525 | Plow Beam | 2 |
| 18 | 2503039 | Bolt, 3/8"-16NC x 2-1/2" Hex Head Gr.2 (Shear) | 2 |
| 19 | 2500055 | Nut, 3/8"-16NC Stamplock Hex | 2 |
| 20 | 2503135 | Bolt, 3/4"-10NC x 3" Hex Head Gr. 5 (Pivot) | 2 |
| 21 | 2502001 | Washer, 3/4" Springlock | 2 |
| 22 | 2500002 | Nut, 3/4"-10NC Full Hex | 2 |
| 23 | 2503088 | Bolt, 5/8"-11NC x 2-1/2" Hex Head Gr.5 | 2 |
| Go To MP-114 Plow - Click Here | Go To MP-214 Plow - Click Here |
14" Standard Size Plow Moldboard Assembly | |
| Ref. No | Part No. | Description | No. Req'd 1 Bottom |
No. Req'd 2 Bottom |
| 1 | 2503290 | Bolt, 7/16"-14NC x 1-1/2" Clipped Head | 4 | 8 |
| 2 | 800507 | 14" Share | 1 | 2 |
| 3 | 2503291 | Bolt, 7/16"-14NC x 1-1/4" #3 Plow Head | 10 | 18 |
| 4 | 2503292 | Bolt, 7/16"-14NC x 2" #3 Plow Head | 1 | 2 |
| 5 | 2501007 | Washer, 7/16" Flat | 15 | 28 |
| 6 | 2500012 | Nut, 7/16"-14NC Full Hex | 15 | 28 |
| 7 | 800501 | Shin | 1 | 2 |
| 8 | 800502 | Moldboard | 1 | 2 |
| 9 | 800503 | Frog (sold only with complete bottom assemblies) | 1 | 2 |
| 10 | 800504 | Landside, Long Rear (Shown) | 1 | 1 |
| 800508 | Landside, Short Front (Not Shown) | - | 1 | |
| 11 | 800509 | Clip | 1 | 2 |
| 12 | 800527 | Brace, Rear Landside (Shown) | 1 | 1 |
| 800528 | Brace, Front Landside (Not Shown) | - | 1 | |
| 13 | 800529 | Heel | 1 | 1 |
| 14 | 2503286 | Bolt, 5/8"-11NC x 3" Carriage Head | 1 | 2 |
| 15 | 2502007 | Washer, 5/8" Springlock | 1 | 2 |
| 16 | 2500013 | Nut, 5/8"-11NC Full Hex | 1 | 2 |
| 800570 | Bottom Assembly, 14" Rear | 1 | 1 | |
| 800575 | Bottom Assembly 14" Front | - | 1 | |
| Note: Some original hardware is metric. Replacement parts will be American National. | ||||
| NOTICE: Worksaver Inc. has a corporate policy of continous product improvement and development: Therefore, specifications are subject to change without any advance notice. Worksaver Inc. is not responsible for differences between specifications or illustrations contained in this site and the actual equipment. |
| To report problems or ask questions concerning Worksaver's web site, please contact the Webmaster. Copyright © 1996-1999 Worksaver, Inc. All Rights Reserved. Legal Notices This document was last modified on |