MPLP-112 PLOW

Low Profile One Bottom 12 Inch Plow

Go To Moldboard - Click Here

 

Ref. No	Part No.	Description	No. Req'd
1	800536	Main Frame Weldment	1
2	800537	Pull Shaft Weldment	1
3	800538	Brace, Right Hand Side	1
4	590108	Lift Pin (AK-578)	1
5	2503004	Bolt, 1/2"-13NC x 1-1/2" Hex Head Gr.2	2
6	2502002	Washer, 1/2" Springlock	1
7	2500003	Nut, 1/2"-13NC Full Hex	1
8	800547	Shank, Plow Bottom	1
9	2503135	Bolt, 3/4"-10NC x 3" Hex Head Gr. 5 (Pivot)	1
10	2502001	Washer, 3/4" Springlock	1
11	2500002	Nut, 3/4"-10NC Full Hex	1
12	2503039	Bolt, 3/8"-16NC x 2-1/2" Hex Head Gr.2 (Shear)	1
13	2501004	Washer, 3/8" Flat	2
14	2500055	Nut, 3/8"-16NC Stamplock Hex	1
15	2503088	Bolt, 5/8"-11NC x 2-1/2" Hex Head Gr.5	2
16	2502007	Washer, 5/8" Springlock	2
17	2500013	Nut, 5/8"-11NC Full Hex	2

12" Moldboard

12" Low Profile One Bottom Moldboard Assembly

 

Ref. No	Part No.	Description	No. Req'd
1	2503290	Bolt, 7/16"-14NC x 1-1/2" Clipped Head	3
2	800533	Share 12" - Low Profile	1
3	2503291	Bolt, 7/16"-14NC x 1-1/4" #3 Plow Head	5
4	2501007	Washer, 7/16" Flat	5
5	2500012	Nut, 7/16"-14NC Full Hex	5
6	800530	Moldboard - Low Profile	1
7	800503	Frog (sold only with complete bottom assemblies)	1
8	800531	Landside, Long - Low Profile	1
9	2503286	Bolt, 5/8"-11NC x 3" Carriage Head	1
10	2501005	Washer, 5/8" Flat	1
11	2500013	Nut, 5/8"-11NC Full Hex	1
	800578	Bottom Assembly 12" Low Profile	1
Note: Some original hardware is metric. Replacement parts will be American National.

NOTICE:     Worksaver Inc. has a corporate policy of continous product improvement and development: Therefore, specifications are subject to change without any advance notice. Worksaver Inc. is not responsible for differences between specifications or illustrations contained in this site and the actual equipment.

To report problems or ask questions concerning Worksaver's web site, please contact the Webmaster. Copyright © 1996-1999 Worksaver, Inc. All Rights Reserved. Legal Notices This document was last modified on