STANDARD DUTY POST HOLE DIGGER

photo of Model 500 Post Hole Digger The model 500 post hole digger handles 6", 9", or 12" standard or heavy duty augers with 2" inside diameter opening (see below). The three position boom allows the operator to maximize the auger digging depth. The model 500 mounts on tractors with category 1 or 2 rear three-point hitches. A handle is provided for the operator to adjust the digging angle from the driver seat. The gearbox is protected by the shear-bolt PTO driveline. The gearbox features tapered roller bearings and spring loaded seals,for long service life.
Click Here for Model #500 Parts List
Click Here for Model #500 Manual
AUGERS AND ACCESSORIES
The optional model DFK-50 Down Force Kit is designed for the model 500 post hole digger. The DFK-50 provides additional down pressure to dig through hard soil surfaces. The DFK-50 kit inludes the hydraulic cylinder & hoses.

NOTE: Please keep a distance of 20 feet from moving parts.Click Here for DFK-50 Parts List

Down Force Kit Photo
WORKSAVER AUGERS
Model Description
6" STD
9" STD

12" STD
6" Standard Duty Single Flight Auger with teeth
9" Standard Duty Single Flight Auger with teeth
12" Standard Duty Single Flight Auger with teeth
6" HDSF
6" HDDF
9" HDSF
9" HDDF
12" HDSF
12" HDDF
12" Ext.
6" HD Single Flight Auger with teeth
6" HD Double Flight Auger with teeth
9" HD Single Flight Auger with teeth
9" HD Double Flight Auger with teeth
12" HD Single Flight Auger with teeth
12" HD Double Flight Auger with teeth
12" Optional Extension     Ext. Parts List
Standard Duty Augers: use for lighter soils free of stones, roots, etc.
Heavy Duty Single Flight Augers: use for tougher digging or where stones, roots, etc. may be present.
Heavy Duty Double Flight Augers: use for loose soil such as sand/gravel to help carry soil to the surface.
NOTE: Augers are equipped with "Red Claw" cutting edges which have single hole mounting and hard- surfaced cutting edges.

STANDARD AUGER PARTS LIST

HEAVY DUTY SINGLE FLIGHT PARTS LIST

HEAVY DUTY DOUBLE FLIGHT PARTS LIST

Input and Output Replacement Guard Kits
for Older Worksaver Post Hole Diggers Only
Mounting Hardware and Safety Signs are included Model 500 Post Hole Diggers with Curtis Gearbox
(Note: Gearbox has cast hole for handle on side)
Model 500 Post Hole Diggers with Comer Gearbox
(Note: No threaded holes in bottom of gearbox)
Model 500 Post Hole Diggers with Comer Gearbox
(Note: Threaded holes in bottom of gearbox)
Post Hole Diggers Model 706 with Omni Gearbox
12" Auger Extension Guard (Note: need to drill hole)    
Ext. Parts List

Please read carefully and follow all safety instructions.

NOTICE:     Worksaver Inc. has a corporate policy of continous product improvement and development: Therefore, specifications are subject to change without any advance notice. Worksaver Inc. is not responsible for differences between specifications or illustrations contained in this site and the actual equipment.
To report problems or ask questions concerning Worksaver's web site, please contact the Webmaster.
Copyright © 1996-2011 Worksaver, Inc. All Rights Reserved. Legal Notices
This document was last modified on