POST HOLE DIGGER
|The model 300 post hole digger is designed to fit most 14 - 24 horsepower small tractors equipped with a category 0 three-point hitch or limited Cat. 1 and a 540 rpm PTO. The model 300 post hole digger handles 6", 9", and 12" diameter standard duty 30" length augers. The three position boom allows the unit to fit a variety of tractor models. A handle is provided for the operator to adjust the auger starting angle.|
|The gearbox has a 3:1 gear ratio and is protected by the shear-bolt PTO driveline. The gearbox features tapered roller bearings and spring loaded seals. The model 300 digger is built for years of trouble-free work with a minimum amount of maintenance.
NOTE: Most tractors of this size have lift arms made of 7/8 inch diameter (Cat. 1) pins, but with the 20 inch Cat. 0 spacing. Tractors with very short lift arms made for 5/8 inch diameter pins may not be suitable for digging post holes. (Special 5/8 inch diameter pins are available for those tractors that can handle the post hole digger.
|WORKSAVER 30" LONG AUGERS for MODEL 300|
Click Here for 30" Auger Parts List
6" HD Single Flight Auger with teeth|
9" Standard Duty Single Flight Auger with teeth
12" Standard Duty Single Flight Auger with teeth
12" Optional Extension Ext. Parts List
|NOTE: Augers are equipped with "Red Claw" cutting edges which have single hole mounting and hard- surfaced cutting edges.|
Please read carefully and follow all safety instructions.
|NOTICE: Worksaver Inc. has a corporate policy of continous product improvement and development: Therefore, specifications are subject to change without any advance notice. Worksaver Inc. is not responsible for differences between specifications or illustrations contained in this site and the actual equipment.|
|To report problems or ask questions concerning Worksaver's web site, please contact the Webmaster.|
Copyright © 1996-2011 Worksaver, Inc. All Rights Reserved. Legal Notices
This document was last modified on