STTC 404 4Ft
Rotary Cutter

   

PTO Parts List 4' Gearbox Parts List TailWheel Parts List

STTC-404 (4' Cutter){Go Top of Page}
Ref. No Part No. Description No. Req'd
1 652401 Deck Weldment (STTC-404) 1
2 652402 Deflector Shield, Center (STTC-404) 1
3 652403 Deflector Shield, Side (STTC-404) 2
4 652532 Bolt, M12 x 1.25 x 30 Hex Head 8
5 650817 Washer, M12 Flat 17
6 652530 Locknut, M12 x 1.25 9
7 652405 Gage Wheel Adjustment Bracket 1
8 652537 Locknut, M14 x 1.25 4
9 652536 Washer, M14 Flat 4
10 652407 Bracket, Hitch Pin 2
11 652526 Hitch Pin Cat.I 2
12 2502005 Lockwasher, 7/8" Split Type 2
13 2500017 Nut, 7/8"-14UNF Hex 2
14 652533 Bolt, M16 x 1.5 x 45 Hex Head 7
15 650880 Washer, M16 Flat 7
16 652507 Nut, Lock M16 x 1.5 11
17 652504 Blade Bolt Cover 1
18 652534 Locknut, M8 x 1.25 2
19 652408 Gear Box 1
20 652517 PTO Shield Mount Bracket 1
21 652528 Bolt, M8 x 1.25 x 20 Hex Head 2
22 650873 Lockwasher, M8 2
23 652509 PTO Shield 1
24 652510 Shield Cable & Pin Assembly 1
25 2504225 Manual Holder 1
26 652538 Locknut, M6 x 1 3
27 652539 Washer, M6 Flat 3
28 652404 Blade, 4 Ft. 2
29 650850 Cotter Pin 1
30 650849 Nut, 1"-14 Slotted Flange Hex 1
31 652520 Bolt, Blade 1-1/8" (Blade Bolt) 2
32 652521 Blade Pan 1
33 652522 Lockwasher, 1-1/8" (Blade Bolt) 2
34 652523 Nut, Blade Lock 1-1/8"-12UNF 2
35 652518 Drive Shaft 1
36 2503012 Bolt, 1/2"-13UNC x 3" Hex Head Gr. 2 1
37 2500003 Nut, 1/2"-13UNC Hex Head 1
38 652506 Driveline Safety Retaining Ring 1
39 652511 Bolt, M20 x 1.5 x 140 Hex Head 1
40 652512 Top Hitch Bushing 1
41 652513 Top Hitch Bracket 1
42 652514 Nut, Lock M20 x 1.5 1
43 652515 "A" Frame 2
44 652409 Rear Brace (STTC-404) 2
45 650225 Tailwheel Assembly 1
46 652410 Tailwheel "A" Frame (STTC-404) 1
47 652527 Grease Zerk M6 1
48 652404 Bolt, M6 x 20 Hex Head 3

 

PTO Shaft (Shear Bolt Protected)


{Go Top of Page}

Ref. No Part No. Description No. Req'd
652518 Complete Driveline Assembly 1
1 652540 Inner Shaft & Shield Assembly (Implemnet End) 1
2 652541 Shear Bolt Yoke 1
3 652527 Grease Zerk, M6 x 1 1
4 650804 Cross & Bearing Assembly Kit 2
5 650805 Outer Shaft & Shield Assembly (Tractor End) 6
6 650806 Warning Label (Shield Missing) 1
7 650807 Twist Collar Kit 1
8 650808 1-3/8"-6B Q.D. Yoke Assembly 1
652549 Assembly, Inner Shield Half 1
652554 Assembly, Outer Shield Half 1

 

STTC-404 GEARBOX ASSY.


{Go Top of Page}

Ref. No Part No. Description No. Req'd
652408 Complete Gearbox Assembly 1
1 650835 Gearbox Housing 1
2 650836 Input Cap 1
3 650837 Ball Bearing 208 3
4 650838 Input Seal 1
5 652542 Input Shaft 1
6 650840 Retaing Ring 3
7 652411 Input Gear (29 Tooth) 1
8 650842 Input Gasket (0.30) Var.
9 650843 Input Gasket (0.13) Var.
10 650844 Steel Shim (0.20) 1
11 650845 Output Gasket (0.30) Var.
12 650846 Output Gasket (0.13) Var.
13 650847 Lockwasher, M10 10
14 2503061 Bolt, 3/8"-16NC x 1" Hex Head Gr. 8 10
15 650849 Nut, 1"-14 Slotted Flange Hex 1
16 650850 Cotter Pin 1
17 650851 Outer Seal 1
18 650852 Outer Cap 1
19 650853 Outer Bearing Spacer 1
20 652412 Outer Shaft & Pinion (15 Tooth) 1
21 650855 Ball Bearing 207 1
22 650856 Oil Fill Plug 1/2" 1
NS 650857 Level Plug 1/8" 1

 

TAILWHEEL ASSY.


{Go Top of Page}

Ref. No Part No. Description No. Req'd
650225 Tail Wheel Assembly w/Fork, Washer, Cotter Pin 1
1 650223 Fork Weldment 1
2 650224 Tire & Hub Assembly 1
3 650226 Spindle Bolt, M24 x 2 x 186 1
4 650227 Spindle Nut, M24 x 2 1
5 650228 Bushing, Hub ¢25 x ¢35 x 25 2
6 2504003 Cotter Pin, 1/4" x 2-1/2" 1
7 2501010 Washer, 1-1/4" Flat 1
8 2504005 Cotter Pin, 3/16" x 2-1/2" 1

{Go Top of Page}
NOTICE:     Worksaver Inc. has a corporate policy of continous product improvement and development: Therefore, specifications are subject to change without any advance notice. Worksaver Inc. is not responsible for differences between specifications or illustrations contained in this site and the actual equipment.
To report problems or ask questions concerning Worksaver's web site, please contact the Webmaster.
Copyright © 1996-1999 Worksaver, Inc. All Rights Reserved. Legal Notices
This document was last modified on