 |  | |  |
Fit All Roller Conditioners
Improve the performance of your subsoiler with a
patent pending Worksaver Roller Conditioner.
 |
| When mounted behind a subsoiler, the roller conditioner can leave the ground in a smooth enough condition that the next crop can be no-till drilled with no further field work.
The special staggered lug pattern on the Worksaver roller conditioner provides a means of breaking up clods, providing a leveling of the soil surface, while at the same pushing some crop residue into the soil. This design has been tested for over 8 years and has proven to be most effective. Ratchet jacks provide downward adjustment for depth and pressure. Each mount is attached to the tillage unit's rear frame tube and is adjustable for various row spacing. Mounting kits attach to a range of frame sizes from 4x4 to 7x7 and 6x8. |
| NOTE: The roller conditioner should extend beyond the outer shank centers by approximately 18 inches. If the outer shanks are placed close to the frame ends, then the next longer roller conditioner should be used. |  |
| Roller Package less Mounting Kits | |
| Item # | Roller/Conditioner Width |
| 803880 | 6 ft. |
| 803900 | 8 ft. |
| 803910 | 10 ft. |
| 803925 | 12½ ft. |
| 803930 | 15 ft. |
| 803940 | 17½ ft. |
| 803945 | 20 ft. |
| Fit-All Roller Conditioner Part Breakdown | |
| Mounting Kits for Roller Packages Above | ||
| Examples | Frame Size (Rear) | Click Kit # for Part Breakdown |
 |
4" x 4" (Doubled) | #803946 |
 |
4" x 6" Horizontal | #803948 |
 |
4" x 6" Vertical | #803950 |
 |
4" x 7" Horizontal | #803952 |
 |
4" x 8" Horizontal | #803955 |
 |
5" x 5" | #803960 |
 |
5" x 7" Horizontal | #803965 |
 |
5" x 7" Vertical | #803970 |
 |
6" x 6" | #803975 |
 |
7" x 7" | #803980 |
| V-Ripper Frames (Deere and others with similar size and angled frames) | JD V-Ripper Case/NH V-Ripper | #803985 #803990 |
| NOTICE: Worksaver Inc. has a corporate policy of continous product improvement and development: Therefore, specifications are subject to change without any advance notice. Worksaver Inc. is not responsible for differences between specifications or illustrations contained in this site and the actual equipment. |
| To report problems or ask questions concerning Worksaver's web site, please contact the Webmaster. Copyright © 1996-1999 Worksaver, Inc. All Rights Reserved. Legal Notices This document was last modified on |