 |  | |  |
| ULF-355 - ( 3,000 Lb. Loader/Rear Hitch Bale Forks ) |
| ULF-346 - ( 4,000 Lb. Loader/Rear Hitch Bale Forks ) |
| VLF-7655 - ( 3,000 Lb. Loader Bale ForkLift ) |
| VLF-7646 - ( 4,000 Lb. Loader Material ForkLift ) |
| SSPF-40 - ( 4,000 Lb. Pallet Fork ) |
| New Style Fork (#830569) will work as a Replacement Tine on all ULF-346 & VLF-7646 Frames |
| Ref. No | Part No. | Description | No. Req'd |
| 1 | 830522 | Main Frame Weldment (ULF-346 & ULF-355) |
1 |
| 2 | 830564 | Main Frame Weldment (VLF-7646 & VLF-7655) |
1 |
| 3 | 830317 | Lift Channel (ULF-346 & ULF-355) |
2 |
| 4 | 830309 | Lift Pin (1" x 8" Lg.) (ULF-346 & ULF-355) |
4 |
| 5 | 590034 | Linch Pin 1/4" (AK-61) (ULF-346 & ULF-355) |
8 |
| 6 | 830214 | U-Bolt, 5/8"-11NC 3" x 4-1/2" (ULF-346 & ULF-355) |
4 |
| 7 | 2502007 | Washer, 5/8" Spring Lock (ULF-346 & ULF-355) |
8 |
| 8 | 2500013 | Nut, 5/8"-11NC Full Hex (ULF-346 & ULF-355) |
8 |
| 9 | 830543 | Fork Shaft Weldment | 1 |
| 10 | 830569 | Solid Fork Tine w/Anti-Sway (ULF-346, VLF-7646, & SSPF-40) |
2 |
| 11 | 830532 | Tubular Fork Weldment (ULF-355 & VLF-7655) |
2 |
| 12 | 2503111 | Bolt, 5/16"-18NC x 1-3/4" Hex Head | 1 |
| 13 | 2502011 | Washer, 5/16" Spring Lock | 1 |
| 14 | 2500011 | Nut, 5/16"-18NC Full Hex | 1 |
| 15 | 830213 | Balance Spike | 1 |
| 16 | 830554 | Fork Adjustment Collar | 4 |
| 17 | 2503191 | Set Screw 3/8"-16NC x 3/4" Square Head | 4 |
| 18 | 2503004 | Bolt, 1/2"-13NC x 1-1/2" Hex Head | 1 |
| 19 | 2501003 | Washer, 1/2" Flat | 1 |
| 20 | 2502002 | Washer, 1/2" Spring Lock | 1 |
| 21 | 2500003 | Nut, 1/2"-13NC Full Hex | 1 |
| 22 | 101026 | Safety Sign - Caution (Instruction Manual) | 1 |
| 23 | 101037 | Safety Sign - Caution (Observe Rated Capacity) | 2 |
| 24 | 101097 | Safety Sign - Caution (Never Exceed Lift Capacity) | 1 |
| 25 | 830761 | Main Frame Weldment (SSPF-40) |
1 |
| 26 | 830765 | Fork Shaft Weldment (SSPF-40 Only) |
1 |
| NOTICE: Worksaver Inc. has a corporate policy of continous product improvement and development: Therefore, specifications are subject to change without any advance notice. Worksaver Inc. is not responsible for differences between specifications or illustrations contained in this site and the actual equipment. |
| To report problems or ask questions concerning Worksaver's web site, please contact the Webmaster. Copyright © 1996-2011 Worksaver, Inc. All Rights Reserved. Legal Notices This document was last modified on |