HYDRAULIC POST HOLE DIGGERS
Worksaver offers seven hydraulic post hole diggers to meet most needs.

There are many benefits that hydraulic operated post hole digger provides over the PTO operated units. Three of the biggest benefits are:

  1. The ability to reverse the auger should it become entangled in roots or rocks,
  2. No longer replace shear-bolts or repair slip clutches.
  3. No PTO lifting restrictions with the tractor, loader, or backhoe boom.

Models ending with "14H" are designed for 5 - 10 gpm @ 1500 - 3000 psi hydraulic systems. The "14H" units will handle 6, 9, 12, and 14 inch augers.

The models ending with "24H" were designed for 10 - 20 gpm @ 1500 - 3000psi hydraulic systems. The "24H" units will handle 6, 9, 12, 14, 18, and 24 inch augers.

All hydraulic units (except 614H & 624H) come less hydraulic hoses.

614 {Photo The models 614H and 624H three-point post hole diggers are designed for the operator without a front loader but likes the benefits that hydraulic operation. Both the 614H and 624H mount to tractors with cat. I/II hitches.
Click Here for 614H & 624H Parts List
Click Here for 614H & 624H Manual
The 714H and 724H will attach to backhoe booms or excavators to allow an operator to reach hard to get to places. These units also attach to either side of a loader bucket with 4 - 1/2" bolts for an unobstructed view of the digging operation.
Click Here for 714H & 724H Parts List
Click Here for 714H & 724H Manualt
714 Photo
814 Photo The 814H and 824H models clamp on to the bucket for easy on and off. Each unit slips on to the cutting edge of the bucket and has two turnbuckles and chains to secure it to the bucket.

Adjustable for the left or right side of the bucket, allows the operator to have a better view of the digging operation.
Click Here for 814H & 824H Parts List
Click Here for 814H & 824H Manual

The 924H model mounts directly to skid steers with a universal quick attach for increased versatility.
Click Here for 924H Parts List
Click Here for 924H Manual
Flat-Faced Coupler Set
924 Photo

WORKSAVER AUGERS
9" STD
12" STD
9" Standard Duty Single Flight Auger with teeth
12" Standard Duty Single Flight Auger with teeth
6" HDSF
6" HDDF
9" HDSF
9" HDDF
12" HDSF
12" HDDF
14" HDSF
14" HDDF
18" HDDF
24" HDDF
30" HDDF
12" Ext.
6" HD Single Flight Auger with teeth
6" HD Double Flight Auger with teeth
9" HD Single Flight Auger with teeth
9" HD Double Flight Auger with teeth
12" HD Single Flight Auger with teeth
12" HD Double Flight Auger with teeth
14" HD Single Flight Auger with teeth
14" HD Double Flight Auger with teeth
18" HD Double Flight Auger with teeth
24" HD Double Flight Auger with teeth
30" HD Double Flight Auger with teeth
12" Optional Extension     Ext. Parts List
Standard Duty Augers: use for lighter soils free of stones, roots, etc.
Heavy Duty Single Flight Augers: use for tougher digging or where stones, roots, etc. may be present.
Heavy Duty Double Flight Augers: use for loose soil such as sand/gravel to help carry soil to the surface.
NOTE: Augers are equipped with "Red Claw" cutting edges which have single hole mounting and hard- surfaced cutting edges.
STANDARD AUGER PARTS LIST HEAVY DUTY SINGLE FLIGHT PARTS LIST HEAVY DUTY DOUBLE FLIGHT PARTS LIST

Please read carefully and follow all safety instructions.

NOTICE:     Worksaver Inc. has a corporate policy of continous product improvement and development: Therefore, specifications are subject to change without any advance notice. Worksaver Inc. is not responsible for differences between specifications or illustrations contained in this site and the actual equipment.
To report problems or ask questions concerning Worksaver's web site, please contact the Webmaster.
Copyright © 1996-2011 Worksaver, Inc. All Rights Reserved. Legal Notices
This document was last modified on