The patent pending design keeps the front rake of the sweep clamp open during use until the rear section of the clamp is either closed or contacts the material being handled. The cylinder then overcomes the spring pressure causing the front rake to rotate towards the bucket in a sweeping motion moving material in and retaining it in the bucket.
Download the literature
SATG Sweep Action Tine Grapple
  SATG-72 SATG-78 SATG-84
Overall Width (in/mm) 72 / 1829 78 / 1981 84 / 2134
Bucket Depth (in/mm) 31 / 787 31 / 787 31 / 787
Upper Grapple Width (in/mm) 21 / 533 21 / 533  21 / 533 
Length of Front Sweep Clamp (in/mm) 21.5 / 546 21.5 / 546 21.5 / 546
Degrees of Sweep 44 44 44
Grapple Opening (in/mm) 37.13 / 943 37.13 / 943 37.13 / 943
Tine Material 1/2 Steel 1/2 Steel 1/2 Steel
Tine Spacing (in/mm) 5 / 127 5 / 127 5 / 127
Number of Tines 12 14 14
Hose Routing Inside the Frame Inside the Frame Inside the Frame
Cylinder Pressure Rating (psi/bar) 3000 / 207 3000 / 207 3000 / 207
Couplers 1/2 / 13 Body – Connect Under Pressure
Mount Type “Universal Skid Steer”
Weight (lbs/kg) 847 / 384 893 / 405 896 / 406
Product No. 812540 812560 812580
WARNING: Read and understand the operator’s manual before operation. Be sure tractor/skid steer is properly counterbalanced. Damage to equipment or personal injury could occur.